Cdr-king Wireless Router

Product specs:
• Product Name: Bundled Pack (LP-8186)
• Support gateway modes
• 802.11b/g compliant
• WEP, WPA Encryption-64/128bit (WEP), WPA TKIP
• Wireless users access control
• Wireless sites survey
• TCP/UDP/ICMP/ARP protocol stack
• Dynamic DNS
• WDS
• VPN pass-through with the multiple sessions
• Firewall, DoS, IP/Port/MAC filtering
• Virtual DMZ
• DHCP Client and Server
• WAN Access mode
• PPPoE PPTP
• DHCP Client
• Fixed IP address
• UPnP

External Antenna

• Support USB 2.0
• Works with IEEE 802.11b/g standard (at 2.4GHz) for compatibility and mobility
• Up to 54 Mbps data transfer rate
• Ad-Hoc or infrastructure mode
• Soft AP (Access Point) feature creates AP function
• Compact pocket-sized design, lightweight

Last December, I bought this wireless router of CD-R King model LP-8186. It really gave me a headache in activating it and it took me two two days to solve the mystery behind in setting it up. Then another problem naman is how to encrypt my wifi. I did research how to set it but I can't find answers to solve my problem on securing it. (up to now) :((

I think I'll try to visit the CD-R King website and tried to talk to their techinical support there.

My problem just got solved coz I followed this guide. Thanks to Website Maker.

1. Open your Internet Explorer, Firefox, or any available internet browser. Type in 192.168.1.254 in your url browser. Don't forget the “http://“. This will bring you to your router's WLAN page setup embedded in your router's program.

2. Please change the wireless network name ex. owners name, then apply changes. Click “Apply Changes” button and wait again for 15 seconds for the router to restart and initialize.

3. WLAN ACCESS POINT. select the encription supported ex. WPA. passphrase, fill in the key values. ex delacruz123 this is ur network key or password in wifi connection. Then apply changes.

4. Note: you can choose whatever type of Encryption you want to use. In this sample WPA was used. You can fill any word (letters and Numbers) that you want with this field, Just Remember the word you filled in this field, because this will serve as the password for your wireless connection

5. Next click on the TCP/IP Setting then LAN Interface and change the IP Address and DHCP Client Range then click “Apply Changes” button and wait again for 15 seconds for the router to restart and initialize.

6. Change the default ip address to 192.168.10.254 (please note the highlighted number difference compared to the first IP address 192.168.1.254)

7. Also change the DHCP client range to 192.168.10.1 to 192.168.10.253, apply changes

8. On the browser’s URL or Address bar, type the IP address of the router which is 192.168.10.254, and then press the “enter key”. Please note this step because this is what I missed that is why I was not able to activate it the first time.

9. Now click on the Management and click on “Status”, to check if your WAN Configuration has an IP address and that you are already connected to the internet.